Patent Pending K-Grip® Twin Conductor Low Voltage Cordless Suspension

For years there has been demand to do the impossible: suspend and power lightweight LED lighting fixtures without a bulky power cord. They said it couldn’t be done. Until now.
Cable Grippers’ patent pending K-Grip® system supports fixtures and provides low voltage power through and adjustable Gripper support in the same times it takes to install a standard gripper.

Specially designed non-conductive grippers combined with our highly flexible Kevlar reinforced twin conductor 2C/24 AWG conductor, metallic finish K-Cord®, enables installation of adjustable suspension and power in less time and with less components than a standard power cord cable suspension kit.

Our unique silver metallic Kevlar reinforced K-Cord® with a breaking strain of 140lbs tests to 115lbs for safe working loads of 27lbs per gripper enabling a 54lb fixture to be supported with two grippers, offering two or four conductor connection.

Safe working loads are calculated as 20% of the maximum break strength of the gripper/cable combination.

*Available as kits or components

Bottom Exit

LV-BE-1/4-20

Cable exits out the side of gripper

Internal Thread 8/32

NANO Gripper for use with 1/32″ cable (0.81 mm)

Cable exits out side of gripper

Max load 10 lbs

LVC-BE-1/4-20

Gripper for 3/64″ and 1/16″ cable

Cable exits out side of gripper

Safety nut and side screw included

Overall Length 1.49″

Outside diameter is .36″

LVF-BE-1/4-20

Cable exits out the side of gripper

Bottom of gripper internally tapped for M4 metric machine screw (included)

No safety nut

Approximately 1-1/4″ height X 3/8″ diameter

Side Exit

LV-SE-1/4-20

Cable exits out the side of gripper

Bottom of gripper externally threaded 1/4-IP and internally tapped for 1/4 X 20

Approximately 1-3/8″ height X 1/2″ diameter

LVC-SE-1/4-20

Cable exits out the side of gripper

Bottom of gripper has machined slot .255″ wide for attachment to ceiling systems

Includes cross screw

Approximately 1-3/4″ height X 1/2″ diameter

K-Cord®

Silver metallic or Platinum

Stripped 48″ / 72″ / 120″ / Custom sizes
500Ft reels
24/2C

K-Cord

K-Grip® Kits

LV-Pro-Kit-BE

(New) K-Grip® Assembly Kits

Bottom Exit Pro Kit

This kit comes in the following:
2 x LV-C-BE-1/4-20 (mount to canopy)
2 x LV-F-BE-1/4-20 (mount to fixture)
2 x K-Cords, 2C/24 AWG each. (specify length)
2 x Bracket bars
2 x Ceiling canopies
2 x Locknuts

2 Position Side Exit Kit

This kit comes in the following:
2 x LV-C-BE-1/4-20 (mount to canopy)
2 x LV-F-SE-1/4-20 (mount to fixture)
2 x K-Cords, 2C/24 AWG each. (specify length)
2 x Bracket bars
2 x Ceiling canopies
2 x Locknuts