Cross Cable Grippers

Side Exit Grippers For 3/64" (1.19mm) and 1/16" (1.59mm) Cable, with bottom cross cable option.

Cable, 1/16" stainless steel, with #2 1/2 balls ends and captive 1/4-20-knurled thru screws. For use with MGR-SE-1/4-20-BS Gripper or CC-1/16 cross cable coupler.

Cable, 1/16" stainless steel, with #2 1/2 balls ends and captive 1/4-20-knurled thru screws. For use with MGR-SE-1/4-20-BS Gripper or CC-1/16 cross cable coupler.

MGR-SE
1/4-20-BS
Cable exits out the side of gripper. Bottom of gripper slotted for cable pass through and tapped with 1/4-20 allen set screw (included) . Approximately 1-1/4" height X 3/8" diameter.

MGR-SE
CHS
Cables exits out both sides of gripper at 45 degrees. Approximately 1-1/4" height X 3/8" diameter. Call factory for complete assembly pricing. Requires special cable ends.

MGR-SE
TH
Cable exits out the side of gripper. Plunger is smooth, no safety nut. Bottom of gripper has hole for cable pass through and tapped for M4 allen set screw (included) . Approximately 1-1/4" height X 3/8" diameter.

MGR-SE
TH-SN
Cable exits out the side of gripper. Threaded plunger has safety nut. Bottom of gripper has hole for cable pass through and tapped for M4 allen set screw (included) . Approximately 1-1/4" height X 3/8" diameter.

MGR-SE
TB
Cable exits out the side of gripper. Bottom of gripper tapered with Phillips set screw on bottom. Cross hole for horizontal 1/16" cable. Approximately 1-1/4" height X 3/8" diameter.

MGR-SE-TH-C1
Side exit mini gripper with safety nut on plunger. Comes with 1/16" X 9.5" cable with a 10/32 bolts, star washers and captive nuts on each end, held with #2 half ball end.

MGR-SE-TH-C2
Side exit mini gripper with smooth plunger. Comes with 1/16" X 9.5" cable with a 10/32 bolts, star washers and captive nuts on each end, held with #2 half ball end.

MGR-SE-TH-C3
Side exit mini gripper with safety nut on plunger. Comes with 1/16" X 8" cable with #2 1/2 ball on each end.

MGR-SE-TH-C4-8-1/4
Side exit mini gripper with smooth plunger. Comes with captive 1/4-20 X 1/4" long screws on 8" cable with #2 1/2 ball ends.

MGR-SE-TH-C4-8-1/2
Side exit mini gripper with smooth plunger. Comes with captive 1/2-20 X 1/4" long screws on 8" cable with #2 1/2 ball ends.

MGR-SE-TH-C4-13-1/4
Side exit mini gripper with smooth plunger. Comes with captive 1/4-20 X 1/4" long screws on 13" cable with #2 1/2 ball ends.

MGR-SE-TH-C4-13-1/2
Side exit mini gripper with smooth plunger. Comes with captive 1/4-20 X 1/2" long screws on 13" cable with #2 1/2 ball ends.

MGR-SE-TH-C5-5
Side exit mini gripper with smooth plunger. Cross cable is 5" long with die cast mushroom ends (#5).

MGR-SE-TH-C6-18-1/4
Side exit mini gripper with safety nut on plunger. Comes with captive 1/4-20 X 1/4" long screws on 3/64 x 18" cable with #2 1/2 ball ends.

C-1/16-8-BH-1/4
Cable, 1/16 X 8", with 2 each BH-1/4-20-1/4" long, captive with #2 1/2 ball ends.

C-1/16-8-BH-1/2
Cable, 1/16 X 8", with 2 each BH-1/4-20-1/2" long, captive with #2 1/2 ball ends.

C-1/16-12-BH-1/4
Cable, 1/16 X 12", with 2 each BH-1/4-20-1/4" long, captive with #2 1/2 ball ends.

C-1/16-12-BH-1/2
Cable, 1/16 X 12", with 2 each BH-1/4-20-1/2" long, captive with #2 1/2 ball ends.

C-1/16-18-BH-1/4
Cable, 1/16 X 18", with 2 each BH-1/4-20-1/4" long, captive with #2 1/2 ball ends.

C-1/16-18-BH-1/2
Cable, 1/16 X 18", with 2 each BH-1/4-20-1/2" long, captive with #2 1/2 ball ends.

C-1/16-24-BH-1/4
Cable, 1/16 X 24", with 2 each BH-1/4-20-1/4" long, captive with #2 1/2 ball ends.

C-1/16-24-BH-1/2
Cable, 1/16 X 24", with 2 each BH-1/4-20-1/2" long, captive with #2 1/2 ball ends.